/admin

Duraslide Gate Motor Installation Manual

Electric sliding gates are made up of a complex mechanism that includes the functioning of electric gate motors. Sliding electric gates are extremely convenient.

To be able to leave and enter your property only with a single click of a button can be a real comfort. However, if your gates are not working properly, it can be very expensive to get them repaired. Fortunately, if you know enough about your sliding gates, you can repair it on your own and spare yourself the unnecessary expense. Electric Gate Motors Electric gate motors control the operation of you electric sliding gate. They are usually located very strategically, above the ground, near the gates or underground.

Manual gate release operation. Secure installation, independent of gate pillar size. Dura slide gate Duraslide gate motor. Congratulations on purchasing your DURASLIDE gate motor. Ensuing from the installation of the automatic gate motor.

These motors are used for both steel and wooden gates. The motor of any electric sliding gate is much like any other door motor.

There is a simple circuit that makes the gate work. Your vehicle is usually fitted with a transmitter that sends a radio signal to a receiver box that is usually mounted close to the gate. The transmitter is in turn wired to a control box. As soon as the radio receives the signal, the circuit is activated by the control box and the opener arm of the gate slides back to give you access.

Once you push the transmitter button again, the control box receives another signal and closes the gate behind you. The role of the motor comes when the circuit is activated. As soon as the circuit is complete, electric current passes through the motor, which activates and begins to roll the opening arm of the gate in or out. Underground Motors Underground motors are a more popular choice for a sliding gate; however, it is also true that repairing these motors can be quite difficult. These motors are usually used where the owners of the property do not want to see any electrical attachments along with their gate motors. Also, these motors are quite robust since they have to operate in damp conditions.

There are many different models and makes of these motors, and electric gate repair will depend on what kind of motor you have installed to operate the gate. The type of motor would determine the speed of the gate and its mode of operation. Ideally, the motors should also come with a manual override, so that the gates can be opened manually if there is any malfunction in the motor or electrical supply. Repairing an Electric Gate Motor If the electric gate is not working, any number of things could have gone wrong. First, the transmitter may not be sending the radio signal, so checking that should be step one.

The second step is to look at the wiring and make sure that the circuit is getting activated. If the transmitter is working fine and the current is passing through the circuit, then the problem is with the motor. Open the box in which the motor is. Sound soap pro torrent mac.

Turn off the electrical supply. If the motor is turning, but the sprocket is not, it is possible that the sprocket may have come loose or the keyway may have become sheared. If the motor is buzzing, but not running, it is most likely that the capacitor of the starter has burned out and needs to be replaced. The motor may have also absorbed some moisture. Cleaning the motor using a wire brush should get it started. However, if the motor is running, but still the gate is not moving, a part inside the motor may have broken down and you may have to replace it.

This guy makes troubleshooting your sliding electric gate motor. This should get things rolling again.

The DACE Solo-Sprint 500 electric slide Gate operator, also known as the Duraslide, is designed for domestic residential and farm property applications. The Low voltage DC motor is suitable for use with gates up to 6m long and 500kg in weight. It’s smart Logicboard has been designed to easily integrate with optional Solar panels (removing the need for a regulator).

Where power is not located at the gate, the supplied transformer can be run upto 50 meters from the the motor unit to the nearest power outlet. Its Simple set up with bright LCD display provides detailed status updates and easy programming. Its modern design and proven durability meets the demands of Australian conditions. The DACE Solo-Sprint 500 Slide Gate Operator Kit includes: • 2 x Four button DACE remotes • 4 x 1m length Nylon reinforced steel rack • 1 x 12v Battery Features: • One touch programming • LCD Display diagnostic status • Warning LED • Solar integration capabilities – regulator not required • Battery backup in case of power outage • Anti-pest design with sealed control board • Pedestrian Mode & Auto Close Features • Optional Safety beam integration • Solid Steel Drive Cog (for increased durability) • Fast opening speed at 25m per minute All Gate Motors come with a 24 month back to base Warranty.