Alesis ADAT Reference Manual. Recording Equipment Alesis ADAT-XT Reference Manual. It does not make sense to send your ADAT to service when there may be only.

Should also be aware that it is extremely easy to damage your heads and other sensitive parts of your ADAT. Do not open up your ADAT to clean the heads. What it comes to is this: ADAT is a very sophisticated piece of digital technology. It is going to be used for your important projects so take the best care of your ADAT and your ADAT heads possible. ADAT HEAD MAINTENANCE The heads of each ADAT are pre-alignedat Alesis. No user adjustment is necessary. Over the course of time, depending on the quality of the tapes used and the environmental conditions where the ADAT and its tapes are stored, head cleaning may become necessary.

Unlike analog or even video tape recorders, the actual sound quality of an ADAT recording will not be affected until there is quite a bit of dirt on the drum and heads. When the Interpolation Indicator (the sunburst at the end of the location display) starts appearing frequently, even on brand new tapes, we recommend that you bring your ADAT to an authorized Alesis Service Center for cleaning.

If the indicator is not appearing and the unit is performing normally, there is no reason to clean the heads. Periodic or preventative maintenance should not be over done to prevent premature wear on the headstack. If head cleaning is necessary and you are unable to bring your ADAT to a service center, you may try using a DRY VHS head cleaning cassette. We recommend 3M VHSHC Black Watch Head Cleaner Video Cassette or 3M ASD HC Digital Audio Head Cleaning Cassette. • Do NOT use any other type of head cleaning cassette.

They are abrasive and will damage or wear out your heads. • Do NOT use head cleaning cassettes that require any kind of liquid.

• Do not use the Black Watch cassette any more often than necessary. Overcleaning the heads wears them down, reducing their life span. • Do NOT attempt to clean the heads yourself unless you are a skilled technician experienced in the maintenance of video cassette recorders. Information for such technicians is available from Alesis Product Support. ADAT head cleaning requires different materials and procedures from analog head cleaning, similar to VCR maintenance. Cleaning the heads with a cotton swab, or rubbing in the wrong direction, will destroy them.

Try to operate using the control panel. Damaged Control Panel Try with remote control. Check batteries. Replace if needed.

X force keygen adobe cs6. The time of download page generation is more than zero seconds. OSX cs6 Collection KBS, Suite X-FORCE KEYGEN master Master Keymaker Torrent this Keygen master Adobe Adobe master When Adobe cs6 master collection xforce keygen adobe cs6 master collection and keygen adobe cs6 master collection serials adobe cs6 master collection for mac This is the latest released Adobe CS6 Master Collection for PC and Mac Version To. Zip 5 days ago COLLECTION. Adobe CS6 Master Collection Keygen torrent. Xforce keygen adobe master collection cs5.

Opening the case of your ADAT will void the warranty. Maintenance of the ADAT should be based on the Interpolation Indicator (or Error Count Display, see p.

74) or if the unit begins to behave erratically. To determine if these symptoms are caused by dirty heads, (not a defective or worn tape), keep a “benchmark” tape from the first weeks of operation set aside in a safe place (see page 40). If the Interpolation Indicator lights frequently when playing back this tape, it is likely that head cleaning is needed, particularly if several hundred drum-onhours have elapsed since the last cleaning (see page 74).

Call Alesis Product Support for more information about head cleaning and authorized Alesis Service Centers. DRUM TIME DISPLAY The XT keeps track of how long the head has been actively spinning against tape (i.e., threaded in stop, or play, or cue/review). This can help determine how long it has been since the last time it was serviced or cleaned. To display the head time counter: 1 Hold [SET LOCATE] and press [STOP]: The number of drum hours will briefly appear in the TIME counter. TAPE MAINTENANCE: SAFE TAPE ADAT tapes are no different than any standard tape: they must be treated with care.